Thingiverse
Hypercube Evolution BLTouch Parametric Mount
door TechMav
12
Downloads
6
Likes
0
Makes
This is the parametric OpenSCAD file for a BLTouch mount adapter for the Hypercube Evolution with an E3d v6 Volcano nozzle.
Zero your Z-axis so the nozzle is just touching the print bed, then measure from the print bed to the top of the extruder clamp that holds the extruder and the BLTouch. Enter this measurement into the SCAD file where it says OVERALL. Assuming you have a BLTouch Smart, this should generate a part that is the correct length to put the retracted tip at 2.5mm +- 0.5mm above to print bed.
The uploaded STL file is just a sample. It is not meant to be downloaded and printed. Use the OpenSCAD file and generate your custom length part.
Zero your Z-axis so the nozzle is just touching the print bed, then measure from the print bed to the top of the extruder clamp that holds the extruder and the BLTouch. Enter this measurement into the SCAD file where it says OVERALL. Assuming you have a BLTouch Smart, this should generate a part that is the correct length to put the retracted tip at 2.5mm +- 0.5mm above to print bed.
The uploaded STL file is just a sample. It is not meant to be downloaded and printed. Use the OpenSCAD file and generate your custom length part.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
