Thingiverse
Hypercube Evolution XY stepper mount
par ikarisan
8
Téléchargements
1
Likes
0
Makes
This is a more stable stepper motor mount for the Hypercube Evolution.
I had the problem that my mounted motors (using the original mount) produced some nasty vibrations, that you was able to see on the outer shells.
This mount uses a square nut to clamp the Y-axis, because I "don't like" brass inserts. ;) !
I printed it with PETG between 15mm/s and 60mm/s with 30% Gyroid infill and a layer height of 0,2mm.
I had the problem that my mounted motors (using the original mount) produced some nasty vibrations, that you was able to see on the outer shells.
This mount uses a square nut to clamp the Y-axis, because I "don't like" brass inserts. ;) !
I printed it with PETG between 15mm/s and 60mm/s with 30% Gyroid infill and a layer height of 0,2mm.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
