IKEA 365 drybox outlets

About: after many try and error, I finally can share the IKEA 365 drybox.i took the linked models, did many many adjustments to get a perfect fit for the PC4-M6 connectors.now the inside feeding part screws on easily on the M6 connector and the cap closes it from outside.the filament stoppers prevent the filament getting pushed inside the box.To load your filament, push your filament in a PTFE tube from outside the box, feed it completely through to the printhead, push the PTFE tube on the connector. You don't need to open the box for this.To unload and store filament, place a filament stopper on the end and push it against the outlet of the PC4 connector. The cap fits on top of it to close everything off.Tip: Put some superglue on the insides of the parts facing the walls of the box. The outlets wont loosen themselves or go anywhere and you get a secure feeling when screwing the topcap on and off. Depending on the distance your box and printer are apart, you may push the filament