MakerOnline

Toys&Games

Impossible Spinner

by 6633x · Toys&Games

228 Downloads

19 Likes

0 Makes

A spinning top that when spinning, gives the illusion that the ball and handle are not touching the outer ring. Print with supports touching buildplate, just to support the ball and bar. The handle screws into place.

Category

Toys&Games

Source

MakerOnline

Published

27.08.2025

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required Hardware needed

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Impossible Spinner?

Any FDM printer should handle Impossible Spinner just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Impossible Spinner need supports when printing?

Yes, Impossible Spinner will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Impossible Spinner available in?

Impossible Spinner is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.

Is Impossible Spinner free to download?

Yes, Impossible Spinner is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Impossible Spinner

Similar Models

Add to Collection