Infinity Mirror

Full mirror is a work in progress will update with full construction details.

These are the .stl files for the frame of an infinity mirror. The mirror itself is made from 200 mm x 200 mm acrylic (one mirror and one 1-way mirror) sheets. The frame was designed based on print results using the ERYONE Gold Silk PLA (which has significantly lower mechanical strength than the Creality PLA I have used to date.

Because of the size of the frame I designed it to be printed in 4 parts that then snap together.

The electronics were designed on Eagle CAD and produced via next PCB in China.

## Print Instructions

You will need to print:
- 2 of each of the im_v5_final_1.stl and im_v5_final_2.stl files above.
- 1 each of the electronics housing (Coming Soon)

NOTE - in order to get a good finish the parts should be printed flat to the print bed with the mirror front facing upwards.

Use tree supports rather than normal supports as they are much easier to remove.

# Parts List -