Ink Dragon Lightforge

Lightforge uses a thin layer of white instead of the standard black found in most Hueforge, allowing light to shine through.Colors will appear deeper and darker when illuminated. The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Beige Transmission Distance: 8 PLA Hatchbox Purple Transmission Distance: 2.6 PLA Hatchbox Pink Transmission Distance: 12This print uses 3 unique filamentsSwap Instructions: Start with Beige At layer #9 (0.8mm) swap to Purple At layer #12 (1.04mm) swap to Pink At layer #18 (1.52mm) swap to Purple At layer #20 (1.68mm) swap to Pink At layer #23 (1.92mm) swap to Beige for the rest.