Insert Inserter Mk1

Here is a a size-customizable brass threaded insert inserter. It helps adding inserts to your models by keeping the soldering iron perfectly perpendicular to your workbench. It is build upon a piece of 2040 V-Slot and two calibrated 8mm rods. By cutting the V-Slot and the rods to your needs, you can keep the Insert Inserter Mk1 as large or as compact as you want. Bill of Materials Aside from the printed parts you will need: 1 x Piece of 2040 V-Slot. Cut to your needs. The one in the pictures is aprox. 40cm long.2 x M5x8 screws with corresponding T-Nuts to attach the V-Slot to the base2 x 8mm smooth rods. Cut to your need. The one in the picture is aprox 22cm long.1 x Surface you can attach the device on. Cut to your needs.4 x M4x25 screws to attach the base (base.stl) to the surface. Alternative you can use chamfered wood screws.2 x M5x8 screws to attach the top piece (profile_top.stl)4 x Slot POM wheels4 x M5x45 screws with lock nuts to attach the wheels2 x eccentric nuts for M5 screw