Thingiverse
Intercom additional speaker box
door _Roguish
3
Downloads
0
Likes
0
Makes
インターホンの増設用スピーカーの箱です
This is a box for an additional speaker for an intercom.
アイホンのIER-2に相当する機能の箱です
This box has the same functions as Aiphone's IER-2.
参考>https://sasukedog.hatenablog.jp/entry/2021/05/30/235755
なお、IER-2互換に必要な回路は
20Ω57mm径スピーカー
直流カット用コンデンサ(10V3.3μ無極性等)
ボリューム調整用の抵抗(無くてもOK)だけです
The only circuit required for IER-2 compatibility is a 20Ω 57mm diameter speaker, a DC cut capacitor (10V 3.3μ non-polar, etc.), and a resistor for volume adjustment (optional). All you need to do is connect these in series.
This is a box for an additional speaker for an intercom.
アイホンのIER-2に相当する機能の箱です
This box has the same functions as Aiphone's IER-2.
参考>https://sasukedog.hatenablog.jp/entry/2021/05/30/235755
なお、IER-2互換に必要な回路は
20Ω57mm径スピーカー
直流カット用コンデンサ(10V3.3μ無極性等)
ボリューム調整用の抵抗(無くてもOK)だけです
The only circuit required for IER-2 compatibility is a 20Ω 57mm diameter speaker, a DC cut capacitor (10V 3.3μ non-polar, etc.), and a resistor for volume adjustment (optional). All you need to do is connect these in series.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!