Thingiverse
Invisalign Case
von jackludwikoski
13
Downloads
11
Likes
0
Makes
This case can be printed as one piece. The parts will print with some supports in the hinging mechanism, but these can be broken quite easily leaving you with a smoothly turning hinge.
In order to reduce supports required and optimize the functionality of the hinge, I would recommend printing the case with the side of the case against the printer bed (not the top or bottom faces) and with the case opened to about 45 degrees. This will hopefully give you the results you are looking for. Best of luck!
In order to reduce supports required and optimize the functionality of the hinge, I would recommend printing the case with the side of the case against the printer bed (not the top or bottom faces) and with the case opened to about 45 degrees. This will hopefully give you the results you are looking for. Best of luck!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
