ITX Tower Style Case

Fully 3D printable ITX computer case.

Got bored so i decided to make one in my free time since ITX cases are too expensive.

I used screws that were all too long in the pictures. If you use the correct ones you wont have to worry about exposed thread or bulges in the plastic/

9 Printed parts. 8 individual, print 2 of the "stand.stl"

Supports standard ITX motherboards, SFX PSUs, Full size GPU, CPU coolers < 75mm tall.
standard machine screws are ideal.
Hardware required: [ 23 1/4in screws #6 32 thread ] [ 5 1/2in screws #6 32 thread ] [4 standard motherboard standoffs and motherboard screws (Come with MoBo) ]
[1 or 2 standard GPU mounting screws (ones that usually go in the PCIe mount bracket on the back of a case) ] [4 standard PSU mounting screws (come with PSU) ]

Assembly: Use pictures and part names to figure it out. Some basic steps tho:
1. Motherboard -> ITX Base Plate. Screw standoffs into the holes using some needle nose pliers or something. Screw motherboard