IX5 Split mini mount

*****Updated!*********** Camera now clicks in hard enough to not use bolts if you have a clean flight. Also much stronger for crashes. M2 bolts optional but will probably still fall off during a crash if you dont use them. length of m2 bolts are up to you, longer=stronger crash resistance. If you are finding the m2 bolts difficult to screw into the camera itself then the camera is not clicked down fully (takes a great deal of force, I use 2 hands) *****

Took 2 things and merged them while adding an IX5 top frame and making it quick connect.

the receiver slides in under the top frame
the camera screws in with 2 small bolts
tiny tiny sideways angle to hold different brands of ix5's main cameras in place snugly.

the cut out of the bottom was to fit the Revolt V3 FC i am using on my builds (little plug on top of fc is slightly too high.)

Replaces IX5 carbon fiber top frame piece.
slots for zipties to hold antenna
slots for ziptie to hold power for split
hole f