Thingiverse

Jet Engine Stand - Structural Design (Split)

by timma300

21 Downloads

17 Likes

0 Makes

I split peteyen86's full size model so that it is printable on a 190mm x 190mm build plate. The long side struts will just fit on a 190mm x 190mm if you rotate them 45 degrees.

The center strut and both cradles need to be printed with supports.

Source

Thingiverse

What you need to print this: Advanced Medium confidence

Why?

supports needed · very large print

Single piece Supports required May need scaling or splitting

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

300 mm (Extra large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Jet Engine Stand - Structural Design (Split)?

Any FDM printer should handle Jet Engine Stand - Structural Design (Split) just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

Does Jet Engine Stand - Structural Design (Split) need supports when printing?

Yes, Jet Engine Stand - Structural Design (Split) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Jet Engine Stand - Structural Design (Split) available in?

Jet Engine Stand - Structural Design (Split) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Jet Engine Stand - Structural Design (Split) free to download?

Yes, Jet Engine Stand - Structural Design (Split) is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Jet Engine Stand - Structural Design (Split)

Add to Collection