Jinks Monkey

if you are a fane of Arcana than you know what this is! Jinx was my favorite so i had to print it! Boost MeThank you for the support! Please post your variations love to see the different takes on my prints! Project: Jinx MonkeyPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Magenta Transmission Distance: 1This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #16 (1.36mm) swap to Magenta for the rest.