MakerWorld

Characters

Johnny5 Static Model

by GazWright · Characters

16 Downloads

1 Likes

1 Makes

Reorganised for easier printing on P1S with a prime tower and configured with supports printed with Bambu PLA Support. Means a tad more gluing but easier to remove from supports and make sure all the parts fit as they should printed on 1 plate. Print time around 16h.

Category

Characters

Source

MakerWorld

Published

15.11.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

16 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Johnny5 Static Model need supports when printing?

Yes, Johnny5 Static Model will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Johnny5 Static Model?

According to the design notes, Johnny5 Static Model takes approximately 16 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Johnny5 Static Model available in?

Johnny5 Static Model is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Johnny5 Static Model free to download?

Yes, Johnny5 Static Model is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Johnny5 Static Model

Similar Models

Add to Collection