Other STL Download - JUMPING GHOSTby ii_aguilar

A cool model jumping ghost.Once he is in your hands you have to try make it jump as the videos!It is not necessary to add springs or any other extra accessories. Model printed 100% with PLA print in place without supports.Just the base of the gnome must me assembled with some adhesive after printing.INSTRUCTIONS:1. Print both stl models2. Assembly the base to the end of the ghost using adhesive (pay attention to the position of the arrow)4. Jump!NOTE IMPORTANT: Please see the full archive with printing parameters and instructions in this link https://drive.google.com/file/d/1UzUPgbujt8WtaG71JmxDOrlAEQw7R9Gq/view?usp=sharingNOTE: This stl file is just for personal use. Not for commercial use. No derivatives.:)3D PRINTING SETTINGSUse your favorite brand of filament. The models on the photos were printed with PLA and we think it’s the best option for this kind of models.Before printing make sure your bed and 3d printer is calibrated and make sure to have a good first layer in order to avoid issues, we recommend to use the option “Brim” on build plate adhesion from Cura slicer or something related in other software.Also, we recommend have a good layer cooling in order to prevent curling and warping.You can use, at least 0.2/0.24mm layer height.3 perimeters12-15% infill.0.4 nozzle.NO SUPPORTS REQUIRED.