K2 Plus CFS Riser

This model is obsolete as I can't modify the STL file, please check the new one in my profile or linked here:https://www.crealitycloud.com/model-detail/674de039f04dbaae0db4449eA cheap K2 Plus CFS Riser so that way you can open up the top glass panel and have a tiny bit more access to your build plate or prints. Apart from the filament to print the legs, it only costs about $4.00 to make unless you already have the supplies below.It requires (one) 1" x 4" furring strip board from Home Depot/Lowes and then (eight) #6 - 3/4" wood screws from any hardware store. Cut the board at 17.25" long and then cut it straight down the middle and from there the process to make the riser should be straightforward. You will also need to reverse the short 485 cable so the corner connection is plugged into the CFS instead of the buffer as originally shown in the printer setup manual.