MakerWorld

Sculptures

keychain

by 3D matske · Sculptures

17 Downloads

5 Likes

14 Makes

Go to Model

keychain, 38-28.91-40.72mm 0.2mm nozzle: 1h 10m; 6.90g 0.4mm nozzle: 35m; 6.88g

keychain keychain accessory keychains miniature sculptures key chain

Category

Sculptures

Source

MakerWorld

Published

23.09.2023

Updated

26.03.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for keychain?

Any FDM printer should handle keychain just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does keychain need supports when printing?

Yes, keychain will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print keychain?

According to the design notes, keychain takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is keychain available in?

keychain is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is keychain free to download?

Yes, keychain is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

keychain

Similar Models

Add to Collection