Kinect plug

*No responsibility taken for any destruction of property arising from the usage of this item*

"Kinect for xbox360" plug for DIY usb adapter without having to cut the plug off.

Z resolution isn't so important but a reasonably small nozzle size might help. I was able to print it on a 0.4mm nozzle but I have a feeling a 0.2 - 0.3mm nozzle would be better.

I used pieces of 0.7mm solid wire for the contacts, soldered on BEFORE inserting into the plastic plug (otherwise it gets melted when you solder them on).

The tolerances on this are pretty tight, too loose and it won't stay in, too tight and it won't fit. I designed it to fit when printed with my printer, your mileage may vary.

Some of the contacts that carry power are extremely close to the metal shell of the plug. Extreme care must be taken to ensure the wires don't short circuit. The built in channels help to stop that but ultimately it's up to the user to ensure safe operation. The 12v power for the kinect was taken f