Thingiverse
knife sharpener
von starforger14
8
Downloads
14
Likes
0
Makes
you'll need:
2 m8 nuts
1 m8 bolt 30mm (head included)[1" 3/16]
1 m4 screw
1 m8 threaded rod (circa 230 mm)[9 1/16]
a sort of rod from 1mm to 2.5mm (from a welding electrode)
a piece of scrap wood (wedge the rod in the wood)
duble sided tape
sand paper (circa 900 grid)
2 m8 nuts
1 m8 bolt 30mm (head included)[1" 3/16]
1 m4 screw
1 m8 threaded rod (circa 230 mm)[9 1/16]
a sort of rod from 1mm to 2.5mm (from a welding electrode)
a piece of scrap wood (wedge the rod in the wood)
duble sided tape
sand paper (circa 900 grid)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
