Knight

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 101.28x180mm in size  You may print at higher layer heights below the Min Depth of 0.72mm  The Max Depth is 2.7mm and the Actual Depth is 2.4mm Filaments Used: PLA BambuLab Tough Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Orange At layer #18 (1.52mm) swap to Jade White for the rest.