Kobe Bryant (DUNK)

Kobe Bryant in his prime doing what he does best (MAMBA MENTALITY!!!) Project: Kobe dunk Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.2 PLA PolyLite Brown Transmission Distance: 0.8 PLA Hatchbox Purple Transmission Distance: 2.6 PLA PolyLite Orange Transmission Distance: 7.5 PLA PolyLite Lemon Yellow Transmission Distance: 6.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Brown At layer #11 (0.96mm) swap to Purple At layer #13 (1.12mm) swap to Orange At layer #14 (1.2mm) swap to Lemon Yellow At layer #21 (1.76mm) swap to Jade White for the rest.