layout plan

The following parameters had to be taken into account during the design: • Mixing the 5 raw materials, among which there are 4 powder and one liquid phase material • The mixed material solidifies in a certain phase • 2 of the materials used are highly abrasive • 2 of the materials used show a tendency to warp and become dusty when poured • One of the materials is acid-based, which corrodes the steel and in some cases colors the raw material • It does not matter what the mixing paddle and material are made of • The mixed material sticks to the mixing bowl and paddle, so it must be easy to clean or replace • A homogeneous mixture can only be achieved with a planter mixer (at least 3 years of experience) • Pre-mixing equipment must be installed • Hygroscopic 2 ingredients that can stay in the air for a short time • Properties of the building (fixed ceiling height, other manufacturing activities) • Fixed packaging of raw materials (BAG, CONTAINER, IBC) • Mixing and measuring can only be done at a given temperature • The mixture must be pressed, measured and shaped • The mixing ratios must be observed • Ensuring the extraction supply • Compliance with occupational health and safety regulations • Ensuring maintenance and accessibility • Modular, standard and easily replaceable parts • The automatic mixing process • Spreading can be done with a machine • Avoiding influencing the signals of the balance cells • Minimum personnel requirements for operation • Effective utilization of the existing equipment park • Possibility of lighting and heating • Ensuring a walkable production line.