LED strip corner diffuser / reflector

This is a light guide to use a led strip for indirect lighting. The strip lies in a recess and shines on a curved surface towards the ceiling or a wall. Things to consider:I used bambu basic white and had a lot of light bleeding downward from the strip, so i lined the recess with aluminium tape, this worked quite well yet some bleeding still exists (see pictures)The parts are 125mm long so they can comfortably be printed standing upright for the best surface finish (outer walls first improves this further)On each end there are two holes 10mm deep for a 15mm strand of filament to help align the pieces. I drilled these to spec with a 1.75mm drill, if you don't have one you might want to modify X-Y hole compensationThe back has a 20x10mm recess 0.8mm deep for adhesive foam tape so it sits flush against the wallThe pieces can be freely scaled along the z axis (standing up), just mind that this also scales the depth of the guide holes and the width of the adhesive indentsThe print profi