Levoit Core 300 filter

A replacement filter for the Levoit Core 300 series air purifier. Works with both 300 and 300S models.If you want to make an activated carbon insert for the original filter, you can find it here:https://makerworld.com/en/models/812044#profileId-753601 (300 model)https://makerworld.com/en/models/1114477#profileId-1111650 (300 and 300s model)FeaturesTwo versions:Refillable version with a screwed-on top. My preferred option.Glued together version.Alternative bottom available:The original filter has a dome feature on the bottom which is not required on my 300 model.Compatible with all materials:You can print it with PLA, PETG, ABS, or ASA. Just make sure your settings are dialed in for the mesh parts.The gasket should be printed with TPU or you can use a different method for sealing (see below).Increased activated charcoal volume:Improved VOC fume filtration which is important in 3D printing.Two-compartments constructions:Use the outside compartment for particle filter (HEPA filter) or mor