LightHouse hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:    PLA PolyLite Black Transmission Distance: 0.3    PLA BambuLab Basic Blue Gray Transmission Distance: 3    PLA PolyLite Grey Transmission Distance: 1    PLA PolyLite White Transmission Distance: 5 Swap Instructions:    Start with Black    At layer #8 (0.72mm) swap to Blue Gray    At layer #13 (1.12mm) swap to Grey    At layer #20 (1.68mm) swap to White for the rest.