Lightweight Modular/Stackable Drawers

For another modular storage solution, also check out our:Stackable Crates with OrganizersIntroducing our completely modular set of stackable drawers. Drawers can either be stacked on top of each other or connected side-by-side for a completely customizable configuration!Lightweight Storage: Comes in multiple, easy-to-print pieces. Heaviest piece is the full-size drawer coming in at just over 85g. Full-size drawers are approx. 140mm x 140mm x 40mm, half-size drawers are approx. 140mm x 70mm x 40mm.Fully-Customizable: Tabs of the top of the outer enclosures fit firmly into slots on the bottoms for secure stacking. Side connectors slide into the slots between sides of enclosures to connect them side-by-side. Prints in multiple pieces for easy color customization.Pieces include bottom and top outer enclosures, full- and half-size drawers, side and back hex inserts, and side connectors. Two types of tops including a single and double tray. Enclosures stack vertically or connect along the sides, drawers slide into the chambers created by the enclosures. Optional side and back inserts help to add a polished look and extra color.Print SettingsAll pieces are easy to print-in-place. Try not to use supports or brims because they can interfere with the connecting slots between parts. To avoid warping, try an first layer bed temp of 60 degrees with a print bed temp of 55 degrees. This keeps them printing nice and flat in PLA on my textured PEI bed using only a 2-line skirt for adhesion.Printed on an Ender-3 V3 SE:- 0.20mm layer quality- Infill: concentric, 15%- 2 line wall count- Supports: NO- Adhesion: skirt- 190 degree nozzle temp- 60 degree be first layer temp, 55 degree print tempThanks for checking it out! Head over to my page or follow for more fun and useful prints.