Linear track guide

you will need 4 M5 x 40 mm
All holes work with M5 bolts..
recessed M5 nuts ready to be pressed into the plastic.

Spacers should work with wheel noted below.

Possible to mount 2040 on the top of the roller as well to make a gantry setup.

Extruded aluminum:
https://www.zyltech.com/zyltech-2040-v-groove-extrusion-pre-cut-lengths-300mm-2000mm/

Rollers:
https://www.zyltech.com/zyltech-20-series-wheel-pulley-bearing-for-2020-aluminum-extrusion-v-slot-compatible/

Ballscrew Mounting block:
https://www.zyltech.com/zyltech-ball-nut-mounting-block-dsg12h/
Compatible ball screw:
https://www.zyltech.com/zyltech-12mm-1204-antibacklash-ball-screw-w-ballnut-pre-cut-lengths-250mm-1000mm/