Lithophane Frame

This is an alternative model for a frame for lithophanes. It is designed to fit the bambu labs backlit LED board found in their store (see the CMYK bundle or you can purchase directly in the filaments section). I am not sponsored by anyone I just wanted to create my own frame with a sturdier base. I created the model from scratch. It is several parts that snap together. Feel free to modify as you like. Printing instructionsPrint all components beginning with 01,02,03,04,05You can use .4mm nozzle and standard .2mm layer heightsI used basic PLA and the .20mm standard profile for parts 01/02/05For the diffuser plate use the same settings recommended by bambu labs:Filament type：PLA Basic - Jade WhiteNozzle size: 0.4mm / 0.6mmWall loops: 5Top shell layers: 5Bottom shell layers: 5None of the parts require supports (you may desire to print 05_frame_cover with the face up for a nicer finish which would require supports)Colors:Print the parts 01_frame_back/04_frame_stand/05_frame_cover in any c