Logitech C930e Mount

This allows for mounting a disassembled Logitech C930e (and possibly other C9xx models) to the front door of a Bambu X1C/P1S. Instructions:Install four (4) M2x2 Inserts in the holes of the base. You could probably use M2x4, but I chose M2x2.Install the internals of a disassembled Logitech C930e into the base. This is a snug fit intentionally.Install six (6) 25x4x3 magnets in the front of the Case. These are friction fit, but you could add a drop of glue if they&#39;re too loose.Install the Face in the front of the Case. Apply slight pressure around the edges of the Face until it&#39;s resting against the stops of the Case. This is a friction fit, but you could add a couple drops of glue if it&#39;s too loose.Attach the Case to the Base using four (4) M2x6 screws.Install six (6) 25x4x3 magnets in the Backplate.Once assembly is complete, place the completed Case</s