Thingiverse

Loomshuttle

by ligfietser

84 Downloads

40 Likes

0 Makes

Made special shuttle to match 40 cm wide table loom (self made with a lot of 3-d printed parts, see pictures).
The pin made from 2 mm welding wire (euro 0,49 per meter), drill the hole for the hingepin to 2 mm and use small lenght of same welding wire. Cutting with Dremel is easy.
Print topside down without supports. Brim advised for good adhesion. Took me 7 hours to print on 0,2 mm layerhight, 50 mm/sec printspeed.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gyG2yqaOZeH

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

7 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Loomshuttle need supports when printing?

No supports needed for Loomshuttle — it's designed to print clean off the bed.

How long does it take to print Loomshuttle?

According to the design notes, Loomshuttle takes approximately 7 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Loomshuttle available in?

Loomshuttle is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Loomshuttle free to download?

Yes, Loomshuttle is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Loomshuttle

Add to Collection