Thingiverse
Lost Cities Game Box Insert
von deemended
8
Downloads
5
Likes
0
Makes
Another board game, another cost savings of a nickel per unit with no in-box organization. Le sigh.
This one is... it's a big one to be honest. It doesn't fill the entire box (just the center bit left open by the cardboard spacer), but there's a lot going on here. I've made an effort to lighten the weight, print time and material usage by hollowing out the underside with hemi-cylinders. The goal was to not need supports but having printed it without, then with, I'd say it definitely benefits from minimal supports (just touching buildplate). The picture of the bottom of Tray 3 (the removable one) shows the results side-by-side - not bad enough to reprint (it's on the bottom, who cares), but enough to make me reconsider. Try it yourself and see if it works out better for you.
There are three "trays", numbered 1 - 3 from bottom to top:
- Trays 1 and 2 hold all the stuff that gets set up or distributed at the start of the game and can be left in the box during gameplay. Ultimately t
This one is... it's a big one to be honest. It doesn't fill the entire box (just the center bit left open by the cardboard spacer), but there's a lot going on here. I've made an effort to lighten the weight, print time and material usage by hollowing out the underside with hemi-cylinders. The goal was to not need supports but having printed it without, then with, I'd say it definitely benefits from minimal supports (just touching buildplate). The picture of the bottom of Tray 3 (the removable one) shows the results side-by-side - not bad enough to reprint (it's on the bottom, who cares), but enough to make me reconsider. Try it yourself and see if it works out better for you.
There are three "trays", numbered 1 - 3 from bottom to top:
- Trays 1 and 2 hold all the stuff that gets set up or distributed at the start of the game and can be left in the box during gameplay. Ultimately t
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
