MakerWorld

Image to Keychain

lovesick bear

by revoltosso · Image to Keychain

5 Downloads

3 Likes

0 Makes

Utiliza 29,12 g de filamento y tarda 5h,28 m Para obtener mejores resultados, use PLAUtilizando boquilla 0,2Se agradece enormemente cualquier comentario, valoración e imagen de tu impresión :)

Category

Image to Keychain

Source

MakerWorld

Published

14.01.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Est. print time

5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for lovesick bear?

Any FDM printer should handle lovesick bear just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print lovesick bear?

According to the design notes, lovesick bear takes approximately 5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is lovesick bear available in?

lovesick bear is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is lovesick bear free to download?

Yes, lovesick bear is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

lovesick bear

Similar Models

Add to Collection