Macro Keypad

I was looking to make my sister a macro pad for Christmas and found MisteR_ofcl's stream deck. While it looks amazing the sliders weren't going to be something she would use, so I decided to remix it to have 18 keys instead and use a raspberry pi pico.

V2 As per a suggestion by amorcage I separated the box and top to make soldering easier. As of now this is untested.

BOM
___

18x cherry brown switches (or switches of your preference)
18x x-key keycaps (relegendable keycaps available from other manufacturers)
1x raspberry pi pico
8x M3 heatset inserts
8x m3x10ish screw
A bunch of Assorted lengths of wire (18 3.5-4 inch and one to connect all the keys to 3.3v)
A micro USB cable

Firmware
___

I followed [this](https://www.tomshardware.com/how-to/raspberry-pi-pico-powered-stream-deck) guide on how to flash and put the code onto the pico.
The firmware included has keys using gpio 0-17 each being macro'd to CRTL+ F7-F24 (I didn't know there was any F keys past 12 but wi