Magsafe Cooled

I wanted to mount my phone to the wall next to my bed with magsafe. The solutions I found all got way too hot or were way too loud to sleep next to.

Therefore I designed this Magsafe cooler.

Its printable without supports.

Required parts:
(printed):
- 1x MagSafe cooled DIY V2 MagSafe holder.stl
- 1x MagSafe cooled DIY V2 Spacer Wall.stl
- 1x MagSafe cooled DIY V2 Spacer over fan.stl
(- 4x MagSafe cooled DIY V2 Spacer Screwdriver.stl)


(non printed):
- 80mm PC fan 12V (as silent as possible)
- 4 mounting screws for said fan
- 4 screws for mounting to the Wall
- dcdc converter (for fan control)
- Usb cable (Poweres the fan)
- Magsafe charger
(- microswitch)

IMPORTANT:
I´ve used a 12V PC fan. Most of them will start spinning at around 4V which makes them increadibly quiet (while still providing the little bit of airflow reuired for keeping the phone cool) which is important for this as the goal is to sleep next to this charger.
Try if your fan starts at th