Mailbox Bracket (Customizable)

This model, which I reccomend to print in some weather resistant material, like ABS or ASA, is intended to help in fixing a mailbox to posts, like in my case, to a small entrance gate. To assembly you need self tapping screws of the appropriate size, in my case they were 3.5mm x 16mm for binding the bracket (4 for each bracket, 8 in total) plus 4mm x 20mm for fixing the box to the bracket (1 per each bracket, 2 in total). If you customize the model please don't forget to switch the M3F project to an appropriate strong profile: 4+ walls 5+ top and bottom layers 15%+ giroyd infill supports are not needed This is my very first customizable item, so please be patient and double-check the produced output.