Malduino Lite USB case

These are two parts that assemble to make a case for a Malduino Lite USB stick. Sorry they don't snap together. I actually welded the two parts together with my soldering iron. Glueing would probably also work, but one would have to be careful not to get any glue on the mini board inside.

You can see in the photos that my printer pushes too much plastic. I did have to do a lot of cleaning up scraping and filing away excess plastic. My printed parts also have thicker wall than the 3D drawing specifies. I used them anyways - you may succeed better, I hope so.

I've included the OpenSCAD files should you wan to modify (improve) on the design. Were I add a modification, it would be thinner plastic or a window over the LED.