Mand

Project: mandalorian.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.5x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Sunlu Meta Black Transmission Distance: 1 PLA Sunlu Matte Green Transmission Distance: 3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA Overture Matte White Transmission Distance: 3.7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Green At layer #8 (0.72mm) swap to Orange At layer #13 (1.12mm) swap to White for the rest.