MakerWorld
Board Games
Voir le modèle
Marble Solitaire
109
Téléchargements
30
Likes
76
Makes
Hey everyone. This my take on the marble solitaire game! The diameter of the board is about 200mm, and it fits about 17mm diameter marbles and smaller. I recommend you use real marbles for this game, however I did attached a file so you can 3d print your own marbles. Just make sure to use a nail file or sand paper to sand the bottoms of the 3d printed marbles once printed. Enjoy! How To Play: To start fill all the holes except one. Move, by jumping vertically or horizontally (not diagonally), one marble over one other, into a vacant hole on the other side. Move the marble which has been jumped into the grooves around the outside of the board.Finish with one marble left in one of the holes.The objective is to remove all the marbles from the board except one.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
