Matrix Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 203.4x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA Sunlu Green Transmission Distance: 6PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to GreenAt layer #15 (1.28mm) swap to White for the rest.