MatterControl Touch Bracket

I now have an enclosure on a TAZ 6. So I designed a bracket to hang my Touch on the outside of the enclosure looking down at the print bed, so I could avail myself of the online monitoring features. The one thing I don't like about the Touch is the cords going to it. I have a USB adapter, with a very fragile port and a short power cord. So I added a bracket in the back to secure the USB adapter and act as a bit of stress relief on the micro USB port. Originally, I built this at a 45 degree angle, but that ended up being wrong for my application. I ended up with a 60 degree angle to point the camera at the center of the build plate. I'm including both files at the 45 one might work better for somebody else. The 60
one has end stops on the tablet holder to keep it from sliding sideways. Seems to work good, and would probably be good for a table mount if you took away the bolt through flaps. Feel free to modify...