Thingiverse
Micro X Quadcopter
von dmerand
46
Downloads
25
Likes
0
Makes
I designed this quadcopter frame to be easily printed using PLA, and to fit the motors + board from a [Syma X1](http://www.amazon.com/Syma-Channel-2-4G-Quad-Copter/dp/B0096SJU3U/) quadcopter.
The arms are strangely long, but here's the thing: the Syma X1 circuitry doesn't like flying small frames. You get a lot of wobble if you reduce the dimensions much from the original. So I had to make the arms longer to reduce the wobble. The wobble was killing me.
If you want to access the original parametric design, which would allow you to change dimensions such as motor or board size, it is available from [Onshape](http://onshape.com) right [here](https://cad.onshape.com/documents/ad79b26dd8ce46629791900c/w/6c8e9655f17443ebaa51fbff/e/284f5821b6fd45df88e2e8ae).
The arms are strangely long, but here's the thing: the Syma X1 circuitry doesn't like flying small frames. You get a lot of wobble if you reduce the dimensions much from the original. So I had to make the arms longer to reduce the wobble. The wobble was killing me.
If you want to access the original parametric design, which would allow you to change dimensions such as motor or board size, it is available from [Onshape](http://onshape.com) right [here](https://cad.onshape.com/documents/ad79b26dd8ce46629791900c/w/6c8e9655f17443ebaa51fbff/e/284f5821b6fd45df88e2e8ae).
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
