Slicer Discord
Microscope – 3D printable model from Thingiverse Thingiverse
Microscope – Bild 1 Microscope – Bild 2 Microscope – Bild 3 Microscope – Bild 4 Microscope – Bild 5 Microscope – Bild 6
Learning

Microscope

67 Downloads
45 Likes
0 Makes
Go to Model
Simple, but useful microscope. Could be perfect as a gift for children, with low magnification (5x lens, 5x and 16x eyepieces), but also for adults who want to discover micro world (up to 40x lens).

Parts list:
- microscope lens (20mm standard, for 160mm tubes) - 5x to 40x, optimal for start would be 10x
- microscope eyepiece (23.2mm standard) - 5x to 16x
- two 6mm aluminium rods or tubes
- two springs (inner diameter 6+)
- two M4 20mm with nuts
- two M4 30mm with nuts
- looong M3 threaded rod with a nut, or two M3 screws 40-50mm
- two wood screws ~3.5mm 15mm long

Elements:
- MBase - lower and upper part connected with 6mm rods
- MTable - table; when used with 5x lens you need to make light hole bigger
- MFocusScrew - yep, it's focus screw
- MTop - body tube
- MMag - body tube is shorter than standard 160mm, so you can add this element to eyepiece to make it longer and get higher magnification
- MCap - dust cover for eyepiece
- MM3connector - to connect two M3 scr
Category
Learning
Source
Thingiverse
Published
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Wood PLA
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection