MakerWorld
Hueforge & Lithophane
Zum Modell
Milkshake bookmark
7
Downloads
4
Likes
4
Makes
SWEET BOOKMARK SET 3 of 3Milkshake ONLY 3 COLORS Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 52.17x159.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Pro Metallic Magenta Transmission Distance: 1 PLA Copymaster 3D Mint Green Transmission Distance: 2.6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Metallic Magenta At layer #18 (1.52mm) swap to Mint Green At layer #23 (1.92mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
