Minecraft Globe

Minecraft Globe Banner Pattern 2D Sculpture This 2D Sculpture Depicts The “Globe Banner Pattern” With A Few Modifications So It Does Not Come Apart. This Simple 3D Model Was Made With OnShape Online 3D Software. This Is My First Model That I Upload So Give Me Your Feedback 😊. Print Settings : For The Globe : 100 % Infill Print As-Is Or Scale (If You Scale Also Scale The Stand) I Used PLA But I Suppose That Any Rigid Material Is Fine (Any Color) Use A Big Layer Hight (I Used 0.28mm) For The Stand : 15 % Infill Print As-Is Or Scale (If You Scale Also Scale The Globe) I Used PLA But I Suppose That Any Rigid Material Is Fine(Any Color)  Use A Big Layer Hight (I Used 0.28mm) Assembly Instructions : Press The Narrow Part Of The Globe In To The Hole In The Stand So It Looks Like In The Picture :   If The Globe Part That You Need To Put In The Hole Is Too Big Then Cut / File It Down A Bit Or Make The Hole Larger Using A Nail File (The Tolerances Are Near Zero ) IF YOU FILE IT DOWN PLEASE WEAR A MASK , THERE MAY BE MICROPLASTICS . This Was Originally Uploaded To Maker World By Myself Here