Thingiverse
Mini flashlight
von VyacheslavSS
3
Downloads
1
Likes
0
Makes
Led 5mm
Battery CR2032
Button - 6x6mm
Bend the two pins of the button up and break off one. The LED cathode is soldered to the button. Protect the soldering area with electrical tape. Insert the battery with the negative side down. The anode of the LED is bent over the positive side of the battery and is clamped by the cover. Fixation with M3 or self-tapping screws.
Battery CR2032
Button - 6x6mm
Bend the two pins of the button up and break off one. The LED cathode is soldered to the button. Protect the soldering area with electrical tape. Insert the battery with the negative side down. The anode of the LED is bent over the positive side of the battery and is clamped by the cover. Fixation with M3 or self-tapping screws.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!