Mini Keyality Box

Mini Keyality Box, key storage and organizer. (Requires x2 magnets, size 10 x 5 x 2 mm)Design Concept:Shall be easy to print. Failures shall not be due to difficulty in slicer setup. Design must not use any type of support material. Take a closer look at the model to see basic 3D printer friendly design. No steep overhangs. Selected stencil font for the KEYALITY logo, this is the easiest to print when on the bed surface. Hinge is print in place. Has two slots to install 10x5x2mm magnets to keep the door shut. Holes to mount to a wall. The Keyality Box is about a 7-hour print. Due to the long print time, I added a bonus wall key hanger that is under 3-hours to print. (all print times vary on depending on printer type, filament, and settings) All designs are limited to K1C build plate size. (The only printer I have) These models are not friendly to changes in scale.Print Settings:Default Creality profile for Generic PLA worked great for me using a K1C. (.4mm nozzle, .16mm layer height)For this model I did change some preferences: (Although not necessary)- Seam Position: Back- Wall Loops: 3 (+1)