Mini PC Mount

Under shelf or under table mount for a Mini PC listed as 130x130x54. The model consists of the mount/holder and a wedge and by combining these two, the PC is locked into place in the holder. The holder and wedge is designed so it can still be used if the rubber feet has been mounted, in which case the pc is 58 mm high (instead of 54 mm). To use it, mount the holder under a shelf or a table and slide the cables from the back to the front and insert the cables into the PC. Now hold the wedge toward the back and top of the holder and slide the PC into position. Finally, slide the wedge toward the front to lock the PC into place. It is of cause possible to press the wedge toward the back, if you need to remove the PC again. Note: There are two wedges. One "right" and one "left". The right and left refers to the way the PC is inserted into the mount - choose the "right" wedge when the bottom of the PC is pointing to the right, the "left" wedge when the bottom of the PC is pointing to the left. However, both wedges works no matter how you insert the PC into the mount, so it is just for looks. Here printed on an Anycubic Kobra 2 Pro in generic blue PLA. If using a "bed slinger" printer, orient the print so the long side are along the Y-axis - this way there are less change of the print detaching during the print.