Thingiverse
Mini Steamroller
von Yann421
15
Downloads
6
Likes
0
Makes
Mini compacter. ~1/100 scale.
2 versions of the the main body.
The one piece if you are confident in the strength of your filament, or the 2 pieces with a stronger joint. In this case, you will need to superglue the 2 parts.
Print without support as displayed.
You will need two M2 screws for the drum. I took mine from an old HDD.
One M3*6 for the joint between front and rear and one for the wheels.
2 versions of the the main body.
The one piece if you are confident in the strength of your filament, or the 2 pieces with a stronger joint. In this case, you will need to superglue the 2 parts.
Print without support as displayed.
You will need two M2 screws for the drum. I took mine from an old HDD.
One M3*6 for the joint between front and rear and one for the wheels.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!