Modular Hardware Mini-Drawer

This assembly act as a modular hardware drawer for several screws, nuts, bolts, washers, etc. It's meant to sit on tables or shelves in places where you require smaller hardware parts in a convenient size.The inner volume of the drawer itself is 25.3mm x 33.4mm x 71mm (not enough to fit a gluestick). The handle fits the tip of an index finger tightly to pull the drawer out. The bodies should be heavy or have a friction pad at the bottom to not slide the assembly when opening a drawer. The body has two cylindrical press-fit adapters on each face. They don't snap, but they squeeze well after some weight tests with hardware inside. You will have to squeeze the bodies together with your fingers to make sure they won't detach from one another. No glue was used in the above pictures. I printed this model with a 0.6mm nozzle, and it should print better with a smaller nozzle because of the cylindrical tabs.On my settings, I'm able to print 20 modules from a 1kg spool of filamen