modular lampshade for socket e27

It takes a bit of patience to print and assemble this lampshade. :) In addition, a little model construction adhesive is needed.

Print:

Part 1 (lower ring): 8x, Layer height: 0.2 Filling: 50%, Raft: no, Support: no
Part 2 (upper ring): 4x, Layer height: 0.2 Filling: 50%, Raft: no, Support: no
Part 3 (strut): 24x, Layer height: 0.2 Filling: 0%, Raft: no, Support: no
Part 4 (inner mounting ring): 1x, Layer height: 0.2 Filling: 100%, Raft: no, Support: no
Part 5 (top ring): 4x, Layer height: 0.2 Filling: 50%, Raft: no, Support: no
Part 6 (bottom ring): 4x, Layer height: 0.2 Filling: 50%, Raft: no, Support: no
Part 7 (decorative trim): 24x, Layer height: 0.2 Filling: 100%, Raft: yes, Support: no

To build:

1. Stick the upper ring (part 2) together.
2. Put the lower ring (part 1) together but do not stick.
3. Insert the upper ring (parts 2) with 4 stay